Kubota KX016-4, KX018-4 Excavator Operator’s Manual

Kubota KX016-4, KX018-4 Excavator Operator’s Manual

This is the COMPLETE Operator’s Manual for the Kubota KX016-4, KX018-4 Excavator.

This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. It Will Help The Operator or anyone Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.

Models Covered:
=========
Kubota KX016-4 Excavator
Kubota KX018-4 Excavator

OPERATOR’S MANUAL CONTAINS:
=========
SAFE OPERATION
DANGER, WARNING AND CAUTION LABELS
CARE OF DANGER, WARNING AND CAUTION LABELS
DEALER SERVICE
TECHNICAL DATA
DESCRIPTION OF MACHINE PARTS
INSTRUMENT PANEL AND CONTROL ELEMENTS
CHECKS BEFORE START
DAILY CHECKS
Working Light Switch
OPERATION OF THE ENGINE
STARTING THE ENGINE
Display Selector Switch
Battery Charge Lamp
Engine Oil Pressure Warning Lamp
Glow Lamp
LCD Display for Normal Operation
LCD Display for Warning
Warning Lamp
Checkpoints after Starting the Engine
STARTING THE ENGINE UNDER COLD CONDITIONS
Precautions in case of Overheat
STOPPING THE ENGINE
Engine Stop Knob
STARTING WITH AN AUXILIARY BATTERY
Observe Following Guidelines when Starting with an Auxiliary Battery
EXCAVATOR OPERATION
RUNNING-IN OF THE NEW EXCAVATOR
Do not Work with Full Engine Rpm’s or Full Loads during the First 50 Working Hours
Oil Change in the Run-in Stage
STARTING
Seat Belt
Operator’s Seat
Lock Lever (Unload Lever)
Working Light Switch
Beacon Light Switch
OPERATION OF TRACK WIDTH CHANGE
OPERATION OF THE DOZER
Adjustment of the Dozer Width
DRIVING
Drive Levers(Right, Left)
Travel Speed Switch
TURNS
Pivot Turn
Spin Turn
UP AND DOWNHILL DRIVING
TWO PATTERN SELECTION SYSTEM (TPSS)
Pattern Change
OPERATION OF THE BOOM
OPERATION OF THE ARM
OPERATION OF THE BUCKET
SWIVEL(UNIT SWING) OPERATION
BOOM SWING OPERATION
AUXILIARY PORT OPERATION
PARKING ON A SLOPE
IMPORTANT INFORMATION ON EXCAVATOR OPERATION
TRANSPORTING THE EXCAVATOR ON A VEHICLE
LIFTING OF THE EXCAVATOR
MAINTENANCE
MAINTENANCE INTERVALS
OPENING AND CLOSING OF PARTS
Opening and Closing of the Fuel Tank Cap
Opening/Closing of the Engine Hood
Where to store the Grease Gun.
Where to keep Operator’s Manual
Cup Holder
DAILY CHECKS..
Checking Coolant Level
Checking Fuel Level
Checking Engine Oil Level
Checking Hydraulic Oil Level
Lubrication Points
Check Fan Belt
Checking Radiator and Oil Cooler
Checking and Cleaning Engine and Electrical Wiring
Washing Whole Machine
REGULAR CHECKS AND MAINTENANCE WORK
EVERY 50 SERVICE HOURS
Draining Fuel Tank
Checking Water Separator
Battery
Battery Charging
Greasing Swing Bearing Teeth
EVERY 200 SERVICE HOURS
Checking Radiator Hoses and Clamps
Inspection and Cleaning Air Filter Element
Air Filter Maintenance
Greasing Swing Ball Bearing
Checking Fuel Line and Intake Air Line
EVERY 250 SERVICE HOURS
Changing Engine Oil(First Engine Oil Change after 50 Service Hours)
Replacing Engine Oil Filter(First Engine Oil Filter Change after 50 Service Hours)
Checking the Fan Belt Tension
EVERY 500 SERVICE HOURS
Drive unit Oil Change(First Oil Change of the 50 hours)
Replacing Fuel Filter Element
Replacing Hydraulic Return Filter Element(first replacement after 250 service hours)
EVERY 1000 SERVICE HOURS
Hydraulic Oil Check for Machines with Hydraulic Breakers
Hydraulic Oil Change(Including Replacing Suction Filter in Hydraulic Tank)
EVERY 1000 SERVICE HOURS OR ONCE A YEAR
Replacing Air Filter Element
EVERY 1500 SERVICE HOURS
Checking Fuel Injection Nozzle(Injection Pressure)
EVERY 2000 SERVICE HOURS
Changing Front Idler and Track Roller Oil
Checking Alternator and Starter Motor
EVERY 3000 SERVICE HOURS
Checking Injection Pump
ANNUAL SERVICE
Electrical Wiring and Fuses
BIENNIAL SERVICING
Replacing of Radiator Hoses
Changing Radiator Coolant
Replacing Fuel Hose
Replacing Intake Air line
OTHER ADJUSTMENTS AND REPLACEMENTS
PURGING FUEL SYSTEM
ADJUSTMENT OF TRACKS
Rubber Tracks
Special Information when Using Rubber Tracks
CHANGING THE BUCKET
FUSES
Replacing Fuses
Fuse Capacities and Circuits
Auxiliary Electric
Slow Blow Fuse
TROUBLESHOOTING..
KUBOTA I.C.S. NAVIGATION LIST OF MESSAGES
OPERATION UNDER COLD WEATHER CONDITIONS
PREPARATION FOR OPERATION IN COLD WEATHER
PROCEDURE AFTER DONE WORK
LONG STORAGE
RECOMMENDED OILS
APPENDICES
MAIN DIMENSIONS
LIFTING CAPACITY

=========

** Model Specification: Kubota KX016-4, KX018-4 Excavator
** Language: English
** Total Pages: 98
** File Format: PDF
** Requirements: Adobe PDF Reader
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…

=========

This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! It also is SEARCHABLE to make what you need easy to find. Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.

Thanks for Visiting!