Komatsu D375A-6 Bulldozer

Komatsu D375A-6 Bulldozer Service Repair Manual + Operation & Maintenance Manual + Field Assembly Instruction (Serial Number: 60001 and up)

This Manual includes three parts as showed below:
1. Komatsu D375A-6 Bulldozer Service Repair Manual
2. Komatsu D375A-6 Bulldozer Operation & Maintenance Manual
3. Komatsu D375A-6 Bulldozer Field Assembly Instruction

This manual contains deep information about maintaining, assembly, disassembly and servicing your Komatsu D375A-6 Bulldozer. it also help you realize peak performance through effective, economical and safe machine operation and maintenance. YOU CAN DO THE REPAIRS YOURSELF AND SAVE MONEY $$$

Machine model Serial number:
D375A-6 60001 and up

The service repair manual contains information and data to this model. has specs, diagrams, and actual real photo illustrations, and schemes, which give you complete step by step operations on repair, Diagnosing, servicing, technical maintenance & troubleshooting procedures for your machine. this manual offers full information you need for repair your machine. the information in this manual will enable you to find trouble and to understand how to repair and maintain your machine without going into service.

The operation & maintenance manual describes procedures for operation, handling, lubrication, maintenance, checking, and adjustment. It Will Help The Operator or anyone Realize Peak Performance Through Effective, economical and safe machine operation and maintenance.

The Field Assembly Instruction provides you with everything you need to know in order to assembly your Komatsu D375A-6 Bulldozer safely and effectively. Step-by-step assembly procedure, parts installation, adjustment and maintenance procedure after completion of assembly.

SERVICE REPAIR MANUAL CONTAINS:
=========
INDEX AND FOREWORD
SPECIFICATION
STRUCTURE AND FUNCTION
STANDARD VALUE TABLE
TESTING AND ADJUSTING
TROUBLESHOOTING
DISASSEMBLY AND ASSEMBLY
MAINTENANCE STANDARD
APPENDIX
DIAGRAMS AND DRAWINGS

OPERATION & MAINTENANCE MANUAL CONTAINS:
=========
FOREWORD
SAFETY
OPERATION
MAINTENANCE
SPECIFICATIONS
ATTACHMENTS, OPTIONS
INDEX

Field Assembly Instruction Contains:
=========
Specifications
Precautions for field assembly
Disposal of removed parts
Assembly procedure, necessary equipment, and schedule
Layout of kit
Style for transportation
Table of tools for field assembly
Tightening torque
Coating materials list
Selection of wire ropes used for assembly
A. Assembly
A-1 Installation of chassis
A-2 Installation of undercarriage
A-3 Adding oil to recoil chamber and pivot chamber
A-4.1 Installation of engine air inlet hood
A-4.2 Installation of engine air pre-cleaner (if equipped)
A-5 Installing direction of exhaust pipe
A-6 Installation of high-mount head lamp (if equipped)
A-7 Installation of blade lift cylinder
A-8 Installation of cylinder yoke grease hose (if equipped)
A-9 Installation of ripper
A-10 Installation of right and left service center boxes at rear of fenders (if equipped)
A-11 Installation of grease hose of ripper pin (if equipped)
A-12 Installation of track
A-13 Assembly of blade
A-14 Installation of grease hose of blade joint (if equipped)
A-15 Installation of blade
A-16 Installation of operator’s cab
A-17 Installation of rear monitor camera (if equipped)
A-18 Installation of additional cab lights (if equipped)
A-19 Installation of ROPS guard
A-20 Installation of VHMS, ORBCOMM antenna (if equipped)
A-21 Installation of platform (if equipped)
A-22 Check track tension.
A-23 Check fuel, coolant and lubricants
A-24 Bleeding air from hydraulic cylinders
A-25 Lubricating
A-26 Installation of fuel quick charge piping (if equipped)
M. Check and maintenance procedures after completion of assembly
M-1 Check and adjustment of operator’s cab
M-2 Inspection of machine monitor
M-3 Checking operation of dual tilt mechanism (If equipped)
M-4 Setting procedure for USER ADJUST MODE
M-5 Setting procedure for maximum cooling fan speed
M-6 Check of engine emergency stop switch
M-7 Check of operation of lamps
M-8 Replacement of return filter (Replacement of standard filter → special flushing parts)
M-9 Flushing of hydraulic circuit, and bleeding air from hydraulic cylinders (Part 1)
M-10 Replacement of return filter (Replacement of special flushing parts → standard filter)
M-11 Bleeding air from hydraulic cylinders (Part 2)
APPENDIX 1. Installation procedure for spill guard (Installation by welding)
APPENDIX 2. Precautions for initialization procedures for VHMS controller
Field assembly inspection report

=========

** Model Specification: Komatsu D375A-6 Bulldozer
** Language: English
** File Format: PDF
** Requirements: Adobe PDF Reader & WinZip
** Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…

=========

This QUALITY manual is 100 percents COMPLETE and INTACT,
no MISSING/CORRUPT pages/sections to freak you out! It also is Bookmarked and SEARCHABLE to make what you need easy to find. Complete download comes in PDF format which can work under all PC based Windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. It can be viewed on any computer, as well as zoomed and printed.

Thanks for Visiting.